F3 675

[satellite]

With the introduction of the Brutale line, MV Agusta has created the reference point of the large displacement naked category offering a product with a truly unique desing and superbike level performance.

The MV Agusta F3 675 redefined the concept of middleweight Supersport bikes with the perfect balance between engine and chassis. The engine is the epitome of Italian technology and the chassis offers class leading performance both on the road as well as at the track. From street to track, the MV Agusta Brutale 675 is able to take on any situation in stride and offer the pleasure, excitement and emotion that is typically MV.

    Your Name (required)

    Your Email (required)

    Your Phone

    Subject

    What Bike Are You Interested In?

    Your Message

    CHARACTERISTICS

    In detail, the principle characteristics of the MV Agusta Brutale 675 are:
    • Ultra-compact three cylinder engine with counter-rotating crankshaft
    • Electronic technology: MVICS (Motor & Vehicle Integrated Control System)
    • Traction control with 8 levels of adjustment
    • Frame with a mixture of steel and aluminum components
    • Single-sided rear swingarm with a Sachs rear shock
    • 43 mm upside-down front forks
    • Racing brakes with radial calipers

    INTRO

    Light, agile and power above and beyond that offered by the competition, the MV Agusta Brutale has a revolutionary engine that is the most advanced in the middle-weight segment. The new in-line three cylinder power plant is derived directly from the  F3 and sets new records for compactness and the application of technical solutions only previously seen on MotoGp motorcycles such as advanced electronics with the MVICS (Motor & Vehicle Integrated Control System), a system that integrates the Full Ride By Wire throttle control with integral multi-maps for the engine and traction control. Power output is a staggering 108,5 hp at 12.500 rpm and a torque curve that is more similar to a liter bike rather than a supersport.

    The chassis, as is the MV Agusta tradition, is without rivals in this category. The frame is a mix of steel tubing and aluminum components that offers a level of rigidity that is destined to make it the reference in its class.

    At only 167 kg dry, the MV Agusta Brutale 675 can satisfy even the most demanding of riders. The extremely light weight coupled with the high power output of the engine will allow the Brutale 675 to accompany new riders from the beginning of their adventure on two wheels all the way to the peak of their riding capabilities.

    DESIGN

    As with all MV Agusta products, the Brutale 675 is characterized with a truly unique style where even the smallest detail was fretted over. For and function come together to create perfection.

    The integration of the fuel tank, seat and tail section is a fulcrum of the design of the Brutale 675 and demonstrates the extreme compactness of the bike. The rider becomes an integrated component of the bike, perfectly inserted into the ultra-short and agile chassis with the narrowest mid-section ever seen on a production supersport that allow all riders to easily place their feet securely on the ground. These details help the rider to immediately become one with the motorcycle and develop the perfect feeling between the Brutale 675 and the pilot. The bike immediately gives the impression that the rider has always ridden this bike as the ergonomics are in perfect harmony with the rider.

    The tail-section is extremely compact, the headlight is classic Brutale and the digital dashboard all contribute to making the MV Agusta Brutale 675 exceptionally unique.

     

    ENGINE

    The in-line 675cc three cylinder engine, which made its debut in the supersport F3, finds an ideal position within the Brutale 675 after receiving a number of modifications that adapts it perfectly to sport/street use that typifies the Brutale.

    The Brutale 675 has a maximum power of 108,5 hp at 12.500 rpm and 65 Nm of torque at 12.000 rpm, but even more important is the huge spread of power and torque throughout the entire rev range and the over-rev after max power that allow the rider to hold a gear even longer if required. Even more important than the peak power is the fact that it is very linear and controllable in all situations. Thanks to this configuration, the three cylinder is an engine capable of taking on city traffic as well as screaming up your favorite mountain road.

    As with the F3, the Brutale 675 utilizes a counter-rotating crankshaft, which has only been seen on MotoGp motorcycles, this important design feature helps the Brutale reach previously unreached levels of dynamic balance and ease of handling.

    The compact dimensions and reduced weight of the engine place it at the top of the naked category and make the MV Agusta Brutale 675 truly unique, destined to become a milestone thanks to the technical solutions incorporated such as the closed deck shell mold cast crankcase with integrated cylinders and the MVICS.

    Another important detail is the fact that the oil and water pumps and circuits have been completely integrated into the crankcases which has a big impact on efficiency and the clean lines that are fundamental on a naked bike.
    Brutale 675, the most powerful Italian three cylinder ever.

     

    ELECTRONICS

    The most advanced electronic engine control system ever seen on a middleweight naked has been designed specifically for this extraordinary new three cylinder. A system of fuel injection that is extremely sophisticated with a 47 mm throttle body for perfect combustion at all rpm’s.

    The MVICS system that allows the engine to unleash a record level of power and control in every situation. The rider can select one of the 4 maps available, or customize an additional map to obtain the power delivery desired.

    With the MVICS system it was possible to generate a perfect harmony between the power delivery and the traction control which offers 8 levels of adjustment and is accessible through the input on the left handlebar and dashboard interface.

     

    FRAME

    The Brutale 675 confirms the fact that MV Agusta is always capable of developing an extremely easy and intuitive chassis while at the same time offering the maximum performance. The upper section is fabricated from steel tubes and connected to the aluminum side plates which mate with the engine.

    The realization of all new MV Agusta models is a synergy between the work of the chassis and engine designers. The ultra-short engine allowed the chassis designers to develop an extremely short and agile bike mated with a long single-sided swingarm that helps put the power to the ground.

    SUSPENSION

    The optimum performance of the suspension was a very important point during the development of the Brutale 675. Even a “simple” naked motorcycle needs to have the best that the market offers in terms of suspension performance.

    The 43 mm upside-down front forks offer feedback that leads the competition and allow the rider to easily take on even the most challenging city streets or tortuous mountain roads with confidence. The rear suspension works through a progressive linkage and has adjustable spring pre-load with 119 mm of rear wheel travel.

    BRAKES

    The best technology currently available is utilized on the MV Agusta Brutale 675, including Brembo radial calipers and Nissin master cylinders with integrated reservoirs underlining the supersport intentions of the project.
    The 320mm front disks are the same as those employed on the F3 and offer incredible stopping power that is also completely controllable in all situations.

    The new Brutale 675 is available in 3 colors combinations: red/silver, pearl white/matt gold and matt Magno grey/matt antrhrocite for € 9.670* and EAS at € 10.070. (Every country could have a price variation due to local import duties and taxes).

     

    ENGINE

    TYPE
    Three cylinder, 4 stroke, 12 valve
    TIMING SYSTEM
    “D.O.H.C”
    TOTAL DISPLACEMENT
    675 cm3 (41.2 cu. in.)
    COMPRESSION RATIO
    12.3:1
    STARTING
    Electric
    BORE X STROKE
    79 mm x 45.9 mm (3.1 in. x 1.8 in.)
    MAX. POWER-R.P.M. (AT THE CRANKSHAFT)
    81 kW (108.5 hp) at 12500 r.p.m.
    MAX. TORQUE-R.P.M.
    65 Nm (6.63 kgm) at 12000 r.p.m.
    COOLING SYSTEM
    Cooling with separeted liquid and oil radiators
    ENGINE MANAGEMENT SYSTEM
    Integrated ignition – injection system MVICS
    (Motor & Vehicle Integrated Control System)
    with three injectors Engine control unit
    Eldor EM2.0, throttle body full drive by
    wire Mikuni, pencil-coil with ion-sensing
    technology, control of detonation and misfire
    Torque control with four maps, Traction
    Control with eight levels of intervention
    CLUTCH
    Wet, multi-disc with mechanical drive
    GEAR BOX
    Cassette style; six speed, constant mesh
    PRIMARY DRIVE
    19/36
    GEAR RATIO
    First gear: 13/37
    Second gear: 16/34
    Third gear: 18/32
    Fourth gear: 19/30
    Fifth gear: 21/30
    Sixth gear: 22/29
    FINAL VELOCITY RATIO
    16/43

    ELECTRICAL EQUIPMENT

    VOLTAGE
    12 V
    ALTERNATOR
    350 W at 5000 r.p.m.
    BATTERY
    12 V – 8.6 Ah

    DIMENSIONS AND WEIGHT

    WHEELBASE
    1380 mm (54.33 in.)
    OVERALL LENGHT
    2085 mm (82.09 in.)
    OVERALL WIDTH
    725 mm (28.54 in.)
    SADDLE HEIGHT
    810 mm (31.89 in.)
    MIN. GROUND CLEARANCE
    160 mm (6.30 in.)
    TRAIL
    95 mm (3.74 in.)
    DRY WEIGHT
    167 kg (368.2 lbs.)
    FUEL TANK CAPACITY
    16.6 l (4.39 U.S. gal.)

    PERFORMANCE

    MAXIMUM SPEED*
    225.0 km/h (139.8 mph)

    FRAME

    TYPE
    ALS Steel tubular trellis
    REAR SWING ARM PIVOT PLATES: MATERIAL
    Aluminium alloy

    FRONT SUSPENSION

    TYPE
    Marzocchi “UPSIDE DOWN”
    telescopic hydraulic fork
    FORK DIA.
    43 mm (1.69 in.)
    FORK TRAVEL
    125 mm (4.92 in.)

    REAR SUSPENSION

    TYPE
    Progressive Sachs, single shock
    absorber with spring preload adjustment
    SINGLE SIDED SWING ARM: MATERIALE
    Aluminium alloy
    WHEEL TRAVEL
    119 mm (4.68 in.)

    BRAKE

    FRONT BRAKE
    Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking disc and flange
    FRONT BRAKE CALIPER
    Brembo radial-type, with 4 pistons Ø 32 mm (Ø 1.26 in.)
    REAR BRAKE
    Single steel disc with Ø 220 mm (Ø 8.66 in.) dia.
    REAR BRAKE CALIPER
    Brembo with 2 pistons – Ø 34 mm (Ø 1.34 in.)

    RIM

    FRONT: MATERIAL/SIZE
    Aluminium alloy 3.50 ” x 17 ”
    REAR: MATERIAL/SIZE
    Aluminium alloy 5.50 ” x 17 ”

    TIRES

    FRONT
    120/70 – ZR 17 M/C (58 W)
    REAR
    180/55 – ZR 17 M/C (73 W)

    FAIRING

    FRONT
    120/70 – ZR 17 M/C (58 W)
    REAR
    180/55 – ZR 17 M/C (73 W)

     

     

    F3 675 ColorsCOLORS AND PRICES

    The new F3 675 is available in 3 colour combinations:

    • PEARL WHITE
    • RED/AGO SILVER
    • MATT AVIO GREY

     

    Comments are closed